19 Replies Last post: May 16, 2012 1:13 PM by Nikolay Matveev  
Roman Kreichman Newbie 7 posts since
Feb 29, 2012
Currently Being Moderated

Feb 29, 2012 11:01 PM

Connectivity issue between PhpStorm and xdebug

Hello,

I'm evaluating PhpStorm v3.0.2

 

I have failed to start a remote Zend debug session, so i'm trying my luck with xdebug.

 

After struggling for couple of hours, I dived into the logs to the communication between PhpStorm and xdebug:

Here's the log for xdebug:

 

 

Log opened at 2012-02-29 18:30:26
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///media/app_eagle_2011_11_22/admin_console/web/index.php" language="PHP" protocol_version="1.0" appid="4025" idekey="PHPSTORM"><engine version="2.1.3"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2012 by Derick Rethans]]></copyright></init>

<- feature_set -i 0 -n show_hidden -v 1
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set" transaction_id="0" feature="show_hidden" success="1"></response>

<- feature_set -i 1 -n max_depth -v 1
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set" transaction_id="1" feature="max_depth" success="1"></response>

<- feature_set -i 2 -n max_children -v 100
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set" transaction_id="2" feature="max_children" success="1"></response>

<- step_into -i 3
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="step_into" transaction_id="3" status="stopping" reason="ok"></response>

<- eval -i 4 -- aXNzZXQoJF9DT09LSUVbJ1BIUFNUT1JNX1hERUJVR19CUkVBSyddKQ==
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="eval" transaction_id="4"><error code="5"><message><![CDATA[command is not available]]></message></error></response>

Log closed at 2012-02-29 18:30:28

 

 

 

and the log PhpStorm log:

 

2012-02-29 20:30:31,952 [  27951]  DEBUG - .connection.PhpDebugConnection - 775598#<-InitNotificationcom.jetbrains.php.debug.xdebug.dbgp.messages.InitNotification@1e28c99 
2012-02-29 20:30:31,964 [  27963]  DEBUG - .connection.PhpDebugConnection - 775598#----connection started 
2012-02-29 20:30:31,965 [  27964]  DEBUG - .connection.PhpDebugConnection - 775598#->FeatureSetRequestcom.jetbrains.php.debug.xdebug.dbgp.messages.FeatureSetRequest@469b16 
2012-02-29 20:30:31,969 [  27968]  DEBUG - bug.dbgp.messages.DbgpResponse - <?xml version="1.0" encoding="UTF-8"?>
<response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set" transaction_id="0" feature="show_hidden" success="1" /> 
2012-02-29 20:30:31,969 [  27968]  DEBUG - .connection.PhpDebugConnection - 775598#<-SetResponsecom.jetbrains.php.debug.xdebug.dbgp.messages.SetResponse@1f35ded 
2012-02-29 20:30:31,970 [  27969]  DEBUG - .connection.PhpDebugConnection - 775598#->FeatureSetRequestcom.jetbrains.php.debug.xdebug.dbgp.messages.FeatureSetRequest@b49cf1 
2012-02-29 20:30:31,971 [  27970]  DEBUG - bug.dbgp.messages.DbgpResponse - <?xml version="1.0" encoding="UTF-8"?>
<response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set" transaction_id="1" feature="max_depth" success="1" /> 
2012-02-29 20:30:31,971 [  27970]  DEBUG - .connection.PhpDebugConnection - 775598#<-SetResponsecom.jetbrains.php.debug.xdebug.dbgp.messages.SetResponse@1abc0bd 
2012-02-29 20:30:31,971 [  27970]  DEBUG - .connection.PhpDebugConnection - 775598#->FeatureSetRequestcom.jetbrains.php.debug.xdebug.dbgp.messages.FeatureSetRequest@fabc3a 
2012-02-29 20:30:31,973 [  27972]  DEBUG - bug.dbgp.messages.DbgpResponse - <?xml version="1.0" encoding="UTF-8"?>
<response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set" transaction_id="2" feature="max_children" success="1" /> 
2012-02-29 20:30:31,973 [  27972]  DEBUG - .connection.PhpDebugConnection - 775598#<-SetResponsecom.jetbrains.php.debug.xdebug.dbgp.messages.SetResponse@15b92b3 
2012-02-29 20:30:31,974 [  27973]  DEBUG - .connection.PhpDebugConnection - 775598#->StepIntoRequestcom.jetbrains.php.debug.xdebug.dbgp.messages.StepIntoRequest@5c27f0 
2012-02-29 20:30:32,752 [  28751]  DEBUG - bug.dbgp.messages.DbgpResponse - <?xml version="1.0" encoding="UTF-8"?>
<response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="step_into" transaction_id="3" status="stopping" reason="ok" /> 
2012-02-29 20:30:32,753 [  28752]  DEBUG - .connection.PhpDebugConnection - 775598#<-StatusResponsecom.jetbrains.php.debug.xdebug.dbgp.messages.StatusResponse@7fd24a 
2012-02-29 20:30:33,105 [  29104]  DEBUG - .connection.PhpDebugConnection - 775598#->EvalRequestcom.jetbrains.php.debug.xdebug.dbgp.messages.EvalRequest@1762fef 
2012-02-29 20:30:33,128 [  29127]  DEBUG - bug.dbgp.messages.DbgpResponse - <?xml version="1.0" encoding="UTF-8"?>
<response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="eval" transaction_id="4">
  <error code="5">
    <message><![CDATA[command is not available]]></message>
  </error>
</response> 
2012-02-29 20:30:33,128 [  29127]  DEBUG - .connection.PhpDebugConnection - 775598#<-ErrorResponsecom.jetbrains.php.debug.xdebug.dbgp.messages.ErrorResponse@f5d656 
2012-02-29 20:30:33,136 [  29135]  DEBUG - .connection.PhpDebugConnection - 775598#---Start detaching 
2012-02-29 20:30:33,136 [  29135]  DEBUG - .connection.PhpDebugConnection - 775598#---Start initializing 
2012-02-29 20:30:33,138 [  29137]  DEBUG - .connection.PhpDebugConnection - 775598#---input stream is finished 
2012-02-29 20:30:33,138 [  29137]  DEBUG - .connection.PhpDebugConnection - 775598#---stop reading 
2012-02-29 20:30:33,145 [  29144]  DEBUG - .connection.PhpDebugConnection - 775598#->RunRequestcom.jetbrains.php.debug.xdebug.dbgp.messages.RunRequest@145af1f 
2012-02-29 20:30:33,146 [  29145]  DEBUG - .connection.PhpDebugConnection - 775598#---stop writing 
2012-02-29 20:30:33,146 [  29145]  DEBUG - .connection.PhpDebugConnection - 775598#----connection stopped 
2012-02-29 20:30:33,146 [  29145]  DEBUG - .connection.PhpDebugConnection - 775598#---Stop detaching 

 

 

I guess the issue is related to the "command is not available" response message.

 

PhpStorm is running on windows

Php & xdebug are running on a local ubuntu virtual machine

xdebug version 2.1.3

I'm using symlinks

 

Any help to further troubleshoot my issue is appreciated.

 

 

Roman

Nikolay Matveev Apprentice 697 posts since
Apr 14, 2010
Currently Being Moderated
Mar 1, 2012 12:02 AM in response to: Roman Kreichman
Re: Connectivity issue between PhpStorm and xdebug

Hello Roman,

 

Please check your xdebug configuration - you need to set 'xdebug.remote_mode'(http://xdebug.org/docs/remote#remote_mode) option to 'req' (it seems that now it is 'jit').

 

Thank you for feedback!

Nikolay Matveev Apprentice 697 posts since
Apr 14, 2010
Currently Being Moderated
Mar 1, 2012 11:42 PM in response to: Roman Kreichman
Re: Connectivity issue between PhpStorm and xdebug

Roman,

 

Please attach your phpinfo() output (ensure that it corresponds to interpreter configuration installed on web server, so it is better to get phpingo() output from web page).

 

Thank you for feedback!

Nikolay Matveev Apprentice 697 posts since
Apr 14, 2010
Currently Being Moderated
Mar 3, 2012 1:22 PM in response to: Roman Kreichman
Re: Connectivity issue between PhpStorm and xdebug

Roman,

 

You can't use Xdebug and Zend Debugger extensions simultaneously. Please try to disable Zend Debugger extension.


Thank you for feedback!

Ed Woolf Newbie 8 posts since
Mar 29, 2012
Currently Being Moderated
Mar 29, 2012 8:04 PM in response to: Roman Kreichman
Re: Connectivity issue between PhpStorm and xdebug

Hi,

 

I am experiencing a similar issue, and have tried the suggestions in this post without success.

I really like phpstorm and want to recommend it for general use in our company (big multinational) but after wrestling for several hours (very frustrating), I cannot get the debugging to work - a real showstopper. Judging from the forums, the complexity of getting the debugger to work with phpstorm is a major issue. Phpstorm rocks, but you have to make this debugger config simpler!

 

My problem:

 

Debugging does not stop at breakpoints.

 

Debugger message in PHPStorm reads: waiting for incoming connection with session id '12441'

 

Xdebug website reports that xdebug IS installed.

 

My phpinfo():

 

 

xdebug

xdebug support enabled

Version 2.1.4


Supported protocols Revision

DBGp - Common DeBuGger Protocol $Revision: 1.145 $


Directive Local Value Master Value

xdebug.auto_trace Off Off

xdebug.collect_assignments Off Off

xdebug.collect_includes On On

xdebug.collect_params 4 4

xdebug.collect_return On On

xdebug.collect_vars On On

xdebug.default_enable Off Off

xdebug.dump.COOKIE no value no value

xdebug.dump.ENV no value no value

xdebug.dump.FILES no value no value

xdebug.dump.GET no value no value

xdebug.dump.POST no value no value

xdebug.dump.REQUEST no value no value

xdebug.dump.SERVER REMOTE_ADDR,REQUEST_METHOD,REQUEST_URI REMOTE_ADDR,REQUEST_METHOD,REQUEST_URI

xdebug.dump.SESSION no value no value

xdebug.dump_globals On On

xdebug.dump_once On On

xdebug.dump_undefined Off Off

xdebug.extended_info On On

xdebug.file_link_format no value no value

xdebug.idekey ewoolf no value

xdebug.manual_url http://www.php.net http://www.php.net

xdebug.max_nesting_level 100 100

xdebug.overload_var_dump On On

xdebug.profiler_aggregate Off Off

xdebug.profiler_append On On

xdebug.profiler_enable Off Off

xdebug.profiler_enable_trigger On On

xdebug.profiler_output_dir C:\PROGRA~1\EASYPH~1.9\xdebug\profiler C:\PROGRA~1\EASYPH~1.9\xdebug\profiler

xdebug.profiler_output_name cachegrind.out.%s.%t cachegrind.out.%s.%t

xdebug.remote_autostart Off Off

xdebug.remote_connect_back On On

xdebug.remote_cookie_expire_time 3600 3600

xdebug.remote_enable On On

xdebug.remote_handler dbgp dbgp

xdebug.remote_host 127.0.0.1 127.0.0.1

xdebug.remote_log no value no value

xdebug.remote_mode req req

xdebug.remote_port 9000 9000

xdebug.scream Off Off

xdebug.show_exception_trace Off Off

xdebug.show_local_vars On On

xdebug.show_mem_delta On On

xdebug.trace_format 0 0

xdebug.trace_options 0 0

xdebug.trace_output_dir C:\PROGRA~1\EASYPH~1.9\xdebug\trace C:\PROGRA~1\EASYPH~1.9\xdebug\trace

xdebug.trace_output_name trace.%t trace.%t

xdebug.var_display_max_children 128 128

xdebug.var_display_max_data 512 512

xdebug.var_display_max_depth 3 3

My php.ini:
;Xdebug
zend_extension = "C:\PROGRA~1\EASYPH~1.9\\xdebug\php_xdebug-2.1.4-5.3-vc9.dll"
xdebug.default_enable=0
xdebug.remote_enable=1
xdebug.remote_host=127.0.0.1
xdebug.remote_port=9000
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_autostart = false
; added ecw Thu 03/29/2012 09:18
xdebug.remote_connect_back=On

xdebug.dump_globals=1
xdebug.dump=COOKIE,FILES,GET,POST,REQUEST,SERVER,SESSION
xdebug.dump.SERVER=REMOTE_ADDR,REQUEST_METHOD,REQUEST_URI
xdebug.show_local_vars=1
xdebug.show_mem_delta=1
xdebug.collect_includes=1
xdebug.collect_vars=1
xdebug.collect_params=4
xdebug.collect_return=1
xdebug.auto_trace=0
xdebug.trace_options=0
xdebug.trace_format=0
xdebug.trace_output_dir="C:\PROGRA~1\EASYPH~1.9\\xdebug\trace"
xdebug.trace_output_name="trace.%t"
xdebug.profiler_enable=0
xdebug.profiler_append=1
xdebug.profiler_enable_trigger=1
xdebug.profiler_output_dir="C:\PROGRA~1\EASYPH~1.9\\xdebug\profiler"
xdebug.profiler_output_name="cachegrind.out.%s.%t"
;/Xdebug
My setup could not be simpler:
Local WAMP server (EasyPHP 3) and local development in the www root folder.
I have attached my phpstorm debug config (which seems to be working) and the actual php file I am using.
Other notes:
1. I am an application programmer - I am not so experienced with these settings
2. I remember seeing a question in phpstorm about xdebug or zend debugger - no idea where to find that now...
3. Nikolay made  a comment abouut having to disable zend debugger: I have no idea what that means. What do I need to do?
The xdebug website instructions say set:
zend_extension = "C:\PROGRA~1\EASYPH~1.9\\xdebug\php_xdebug-2.1.4-5.3-vc9.dll"
which I have done and xdebug seems to be working - is this correct?
4.I have tried several suggestions in other posts:
xdebug.remote_connect_back=On (I also tried xdebug.remote_connect_back=1) - made no difference.
5. I am using latest EAC release candidate - I had no choice, the version I downloaded from main site did not recognize my local functions or include_once references and reported "not found" all the time - unusable.
This has been a long post, but I figure you'd rather have the complete picture.
Please understand: I have put in much effort and would really like to get this resolved so that I can introduce your product into our company.
Thank you,
Ed

Attachments:
Ed Woolf Newbie 8 posts since
Mar 29, 2012
Currently Being Moderated
Mar 29, 2012 8:11 PM in response to: Roman Kreichman
Re: Connectivity issue between PhpStorm and xdebug

I forgot to mention:

 

I have run http://www.jetbrains.com/phpstorm/marklets/ in firefox and clicked on generate, then on Start debugger link.

Andriy Bazanov Master 4,159 posts since
May 28, 2010
Currently Being Moderated
Mar 29, 2012 9:42 PM in response to: Ed Woolf
Re: Connectivity issue between PhpStorm and xdebug

Hi Ed,

Judging from the forums, the complexity of getting the debugger to work with phpstorm is a major issue.

Most of the time it has nothing (or very little) to do with PhpStorm -- it's improperly configured (or not even installed) xdebug. Just today I was replying to somehow similar thread

 

  1. Before debugging web app/page, it is better to try to debug some very simple and basic PHP script in CLI mode (PHP Script type of Run/Debug configuration) -- this way is much easier to check if xdebug configured correctly.
  2. To check if you have more than 1 debugger extension installed, please check the output of phpinfo() function (this info will be in the bottom of the header)
  3. Have you seen this articles yet? They should provide enough info for setting up debugger in PhpStorm: http://confluence.jetbrains.net/display/WI/Documentation

 

So far xdebug config seems to be OK. Try settings up value for xdebug.remote_log -- this will help with decising if xdebug is trying to connect to PhpStorm or not (and if it does, what the possible reason may be -- not responding, declined).

Nikolay Matveev Apprentice 697 posts since
Apr 14, 2010
Currently Being Moderated
Apr 3, 2012 6:35 PM in response to: Andriy Bazanov
Re: Connectivity issue between PhpStorm and xdebug

Andriy,

 

Thanks for assistance!

Nikolay Matveev Apprentice 697 posts since
Apr 14, 2010
Currently Being Moderated
Apr 3, 2012 6:35 PM in response to: Ed Woolf
Re: Connectivity issue between PhpStorm and xdebug

Hello Ed,

 

Do you still have the issue?

 

Thank you for feedback!

Ed Woolf Newbie 8 posts since
Mar 29, 2012
Currently Being Moderated
Apr 3, 2012 10:29 PM in response to: Roman Kreichman
Re: Connectivity issue between PhpStorm and xdebug

Hi Nikolai,

 

Thanks for the follow-up.

 

The problem is not solved - I gave up in frustration - could not get past the "waiting for input" message in the debugger. I even tried changing ports from 9000 after telnetting to find open ports - all in vain.

 

So maybe the issue is related to my laptop's security and windows.

 

I also have a LAMP setup on an Amazon Web services (AWS) EC2 cloud and was going to try again but then I read this article:

 

http://stackoverflow.com/questions/9815243/trouble-shooting-phpunit-xdebug-remote-debugging-with-phpstorm

 

- seems to be similar problem?

 

I'm not able to spend the time testing (again) so:

 

If you can point me to clear instructions on using  phpstorm and xdebugger on a remote linux server, I'll have a look, otherwise, I'm afraid it's back to eclipse!

Andriy Bazanov Master 4,159 posts since
May 28, 2010
Currently Being Moderated
Apr 3, 2012 11:09 PM in response to: Ed Woolf
Re: Connectivity issue between PhpStorm and xdebug

Hi there,

 

The stackoverflow thread you mentioned -- the same thread here: http://devnet.jetbrains.net/message/545529

 

So maybe the issue is related to my laptop's security and windows.

If that is the case then disable firewall .. or grant full network access for PhpStorm. Also, I hope you are not running PhpStorm and other PHP IDE at the same time (2 different applications cannot listen on the same port:ip pair).

 

If you can point me to clear instructions on using  phpstorm and xdebugger on a remote linux server

Is this "remote linux server" next to you (same LAN) .. or it's on internet. If second -- you will have to use port forwarding on your router and/or deal with ssh tunelling (maybe even xdebug proxy, dunno).

 

For  "clear instructions" you have to clearly describe your setup (in  details). But ... if you cannot solve local debug (web server is on the  same computer as IDE), then I see no much point jumping straight into  remote debugging: easier part first and then more complex stuff.

 

  1. First local CLI debugging (easier to initiate xdebugger -- no need to mess around with different approaches)
  2. Then local WebServer debugging
  3. Then Remote

 

Usefull to have (for Nikolay to give you better advice):

Ed Woolf Newbie 8 posts since
Mar 29, 2012
Currently Being Moderated
Apr 3, 2012 11:31 PM in response to: Andriy Bazanov
Re: Connectivity issue between PhpStorm and xdebug

Hi Andriy,

 

I appreciate the prompt response. Sadly I do not have the time resources this week.

 

I will be installing onto a different laptop next week, and will revert on my progress. I'll look at the links.

 

It is a very common requirement to debug on a remote server, and if this is more complicated case, then I may be out of my depth here.

 

FYI The Amazon Web Service instance is a virtual dedicated box, i.e. I have bash and ftp access and can pretty much control it.

I don't have advanced skills on port tunnelling.

 

Thanks,

 

Ed

Andriy Bazanov Master 4,159 posts since
May 28, 2010
Currently Being Moderated
Apr 4, 2012 2:45 AM in response to: Ed Woolf
Re: Connectivity issue between PhpStorm and xdebug

Hi Ed,

It is a very common requirement to debug on a remote server, and if this is more complicated case, then I may be out of my depth here.

From PhpStorm side the change between Local WebServer debug and Remote WebServer debug is minimal -- depending on your project setup it can be just 1 single setting change (like, host name etc), but configuring your remote server (xdebug) and your own pc/network (firewall, router port forwarding/ssh tunneling etc -- depends on your remote server) is a different thing that has no relation to PhpStorm (as it can be any IDE here).

 

That's why I suggest to start from making local CLI mode (PHP Script run configuration type) debug working first -- this will ensure that xdebug is configured properly + you will know what needs to be done in PhpStorm to make it work. Once you have done that you should have no issues with continue further (yeah, initiating debug session for web server debug is a bit different, but there are at least 3 ways of doing it in PhpStorm). All this needs to be done on brand new and very simple project (1 or 2 simple scripts to start with).

 

On related note -- check this thread (when you will have time, of course): http://devnet.jetbrains.net/thread/435271?tstart=0

And then continuation: http://devnet.jetbrains.net/thread/435332?tstart=0

Nikolay Matveev Apprentice 697 posts since
Apr 14, 2010
Currently Being Moderated
Apr 24, 2012 7:23 PM in response to: Ed Woolf
Re: Connectivity issue between PhpStorm and xdebug

Hi, Ed,

 

Do you still have the issue?

 

Thank you for feedback!

Ed Woolf Newbie 8 posts since
Mar 29, 2012
Currently Being Moderated
Apr 26, 2012 4:21 AM in response to: Nikolay Matveev
Re: Connectivity issue between PhpStorm and xdebug

Hi Nikolay,

 

I do still have the issue.

 

I recently changed jobs and just yesterday I tried to get xdebug working again in my new environment.

 

My issue is simple: the debugger does NOT stop at any breakpoints. It's very very frustrating.

 

The debugger in PHPStorm shows I am connected to my server. I have tried checking and unchecking enable path names for the server - no difference - still no stop on breakpoints. Reveal log in explorer shows idea.log is empty (?) - I deleted it to clear out other crap before I started latest tests but expected it to show something?

 

My current config is ubuntu remote server running php 5.3, xdebug is enabled for an older version: I am not in a position to change the php server environment.

 

My php.ini:

 

 

This program makes use of the Zend Scripting Language Engine:

 

Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies

 

    with Xdebug v2.1.2, Copyright (c) 2002-2011, by Derick Rethans

 

It might fix things to change php server xdebug settings and latest install but I see on the forums that some others are having the same issue of the debugger not stoppng at breakpoints. Xdebug developer Derick Rethans said he just released a RC of xdebug to address this but user said didn't work. In fact, latest release of xdebug seems to have stability problems, judging from the bug list, so:

 

I am going to keep monitoring the forums (xdebug and this one) but will hold off trying to get this working until xdebug settles down again. I can't afford to get bogged down on this issue in a new job :-)

 

I really think that PHPStorm is an excellent product and your support has been excellent too. That's why I want to get the damn debugger working!!

 

In truth, though, the interface to set up the server and debugger needs to be redone  - there are so many paths to set up to map server and client - very confusing and what each setting is for is really not properly explained. I was wondering: what's this for now? a lot of times! A few example configuration would help enormously, but frankly the whole config is overly technical (in the interests of being flexible I know, but simply serves to confuse here) and needs to be greatly simplified.

I would be happy to assist you with the documentation- but first I need to get the product working so that I can use it at work first.

 

If there is any further news of the Xdebug issue, I know you will keep me posted :-)

 

Best regards

 

Edwin

Nikolay Matveev Apprentice 697 posts since
Apr 14, 2010
Currently Being Moderated
May 1, 2012 11:30 AM in response to: Ed Woolf
Re: Connectivity issue between PhpStorm and xdebug

Hi, Ed,

 

Please provide your Xdebug remote log (xdebug.org/docs/remote#remote_log). I really need to dive into your issue.

 

Thank you for feedback!

Nikolay Matveev Apprentice 697 posts since
Apr 14, 2010
Currently Being Moderated
May 16, 2012 1:13 PM in response to: Ed Woolf
Re: Connectivity issue between PhpStorm and xdebug

Ed,

 

Any progress here?

 

Thank you for feedback!

More Like This

  • Retrieving data ...